More and more, manufacturers are calling for EN 10204:Type 3.2 certified steel or materials for safety-critical equipment and components. If you're not sure what this means, Senior Surveyor David Thompson takes a closer look.
![Command Command](/uploads/1/2/5/3/125369736/482787602.jpg)
![Type Type](/uploads/1/2/5/3/125369736/197341249.png)
Hai, The type 3.1 certificates are inspection documents based on specific inspection of the product to be supplied or on the test unit of which the products supplied are part. The Product test result and tests to be carried out acc. To the requirements defined in the product specification and to the requirement of the order. (Chemical & Mechanical properties) This document shall be validated by the Manufacturer's authorized inspection representative, other than the manufacturing Dept. (like QA/ QC Dept.) Regards, Aneesh KSA On Nov 11, 10:57 am, 'Dharan.' Wrote: Hi All Can any one please furnish the requirements of information should be present in the.ISO 10474 type3.1 / EN 10204 type3.1 MTC cetificates for consumables and materials.Best Regards CD.Reddy Sajeev P, 6:21 น.
ISO 10474:1991 3.1 Inspection certificate A document issued on the basis of inspection and tests carried out in accordance with the technical specifications of the order or of official regulations and the corresponding technical rules. The tests shall be carried out on the products supplied or those in the inspection unit of which the consignment constitutes a part. The inspection unit is set by the product standard, the official regulations and corresponding technical rules or by the order. There are three different types as follows.
Inspection certificate “3.1.A” is issued and validated by an inspector designated in the official regulations, in accordance with these and the corresponding technical rules. Inspection certificate “3.1.B” is issued by the department independent of the manufacturing department and is validated by an authorized representative of the staff independent of the manufacturing department. Inspection certificate “3.1.C” is issued and validated by an authorized representative of the purchaser, in accordance with the specifications of the order. Thanks & Regards Sajeev P.